How To Set Up Sound For Video Recording

Arnab Dey Technology 5 Mins Read
published on: 27 March 2023 last updated on: 28 March 2023
Video Recording

Audio is a very important aspect of a moviegoing experience.

This is because it allows you to enjoy the best possible audio experience. For instance, YouTube has become a lot better than it was a few years ago, as the quality of the audio is now so good that it is hard to forgive poor audio.

Although you may not have a choice when it comes to choosing the right location sound, you can still capture as much as you can with the help of directional microphones. This includes capturing the room tone, dialogue, and environmental sounds.

Moreover, having the ideal environment for recording audio is important for any project, as poor location choices can prevent you from achieving the best results. On the other hand, a text-to-speech video maker can help how to set up sound for video recording with ease.

However, before you start working on post-production, make sure that you take down all of the necessary information so that you can remember everything that happened during the shoot. Having a checklist helps you remember everything that happened during the process.

Here Are 5 Ways To Set Up Sound For Video Recording

1. Sync Your Sound to Your Video

This basic technique on how to set up sound for video recording is one of the most common ways to sync audio by recording it to a digital recorder. You can also use the built-in microphone of your camera to guide the audio tracks.

Here are some tips: 

  • To align the images, use the digital audio converter (DAW) to slide the waveforms of the two audio tracks together.
  • The last bit of synchronization involves the frame rate and bit rate settings for your audio project. For audio, the sample rate is usually 48 KHz.
  • The settings for the video are decided by the target medium. For instance, 24 fps for film is common, 25 fps for PAL, 29 fps for NTSC, and 30 fps for YouTube videos.

2. Use a Good Microphone

Besides being an important factor in video recording, microphones also play an important role in audio quality.

They are categorized into two types based on their form factor:

  • Electromagnetic Design
  • Polar Pattern

Dynamic microphones do not require 48v Phantom Power to operate, and they feature matched stereo pairs and large or small diaphragm sizes.

Condenser microphones, on the other hand, use lower-mass diaphragms to pick up more sound and move more easily.

How Pickup Patterns Affect Sound Quality

The pickup patterns of a microphone are the most crucial features, as they determine if it is the best choice for the job. The polar patterns of the microphone determine its directionality.

Moreover, the most popular microphone in the video industry is the shotgun, which has a robust hyper-cardioid pattern and good rejection at both the front and back. A combination of this and a condenser capsule makes it a must-have.

3. Consider The Placement of Your Mic

One of the most important factors that a producer should consider when it comes to recording audio is the placement of microphones.

TIP: Having a well-positioned lavalier is often the easiest way to achieve the best possible audio.

However, it’s also important to note that visibility can be challenging and that there are compromises that need to be made. We suggest having a boom-mounted microphone to capture direct sound.

4. Find a Camera With a Good Microphone

A good microphone is very important when it comes to recording audio for videos. The buying patterns of cameras have shifted from consumer models to digital cameras, with more cameras equipped with built-in microphones.

Unfortunately, the limitations of using a small diaphragm microphone in a camera still prevent us from improving the experience.

If a camera has a built-in mic jack, then use it. It’s a good idea to move the microphone away from the noise of your camera and closer to the subject.

What We Recommend: The Rode VideoMic NTG is a great choice for those who are looking to use a shotgun-style microphone.

5. Use a Noise Cancelling Filter

Filters and windscreens can help reduce wind noise and minimize plosives. While these are fine for documentaries and news, they are a bit cumbersome to conceal.

One simple technique is to capture room tone. This is done by keeping track of the sound coming from the room between recordings.

Other Alternatives To Setting Up Sound For Video: 3 Tips & Tricks

If you have a camera that doesn’t have a jack for a microphone, there are several alternatives.

One of these is the dual-system audio system, which allows you to use a separate recording device to capture audio while simultaneously recording video.

You can also use a text-to-speech video maker to add music and narration to your photos.

1. The Design of Your Audio

The sound design phase is one of the first steps in creating audio for a video. It involves deciding what kind of environment you want to create for your project.

During the preproduction phase, start gathering ideas and developing a strategy for how you want your audio to sound.

2. Do Sound Mixing

Before you start working on your sound mixing project, it’s important that you consider the external influences that will affect the quality and style of your work.

This includes elements like:

  • Levels
  • Dynamics
  • Panning

Having these references will help you navigate through the various steps in the process.

In addition to being able to identify the elements that will affect your mix, it’s also important to include editing in order to make sure that you’re getting the most out of your work.

3. Monitor Your Audio

In terms of audio accuracy, it’s important to have the proper monitoring to ensure that the audio is as accurate as possible.

The presence of too much or too little bass can be a problem with portable or retail speakers. This issue can be caused by their design, which is typically bass-heavy.

Tips To Do

  • Have the right equipment to minimize the effects of poor audio on images.
  • Have the proper knowledge in monitoring audio to ensure the best possible product is delivered

Conclusion

Getting the right audio for video is a bit challenging at times. There are many things to consider when it comes to recording audio, such as the design of microphones, the signal flow, and the mixing techniques. Understanding these concepts can help you get the most out of your audio.

Read Also:

Arnab is a passionate blogger. He shares sentient blogs on topics like current affairs, business, lifestyle, health, etc. If you want to read refulgent blogs so please follow Voice Faction.

View All Post

Leave a Reply

Your email address will not be published. Required fields are marked *

YOU MAY ALSO LIKE

YOU MAY ALSO LIKE

YOU MAY ALSO LIKE