How To Test Motherboard? Here Is How You Check It

5 Mins Read Sofia 27 Jul 2021
how to test motherboard

The motherboard is one of the most complicated parts of the computer which is so hard to understand according to many people.  In fact, if you ask any experts in the business, they will tell you that diagnosing a motherboard for any problem is one of the most challenging tasks around. True to this, there are people who do not even know what motherboard slot has direct access to the north bridge.  

The information about the motherboard remains scanty which has led to so many questions raised by people who find interest in them.  One of the problems that have come up lately which is so essential is testing the motherboard.  In case of a problem, there might be a need to try and establish what problem is there and deal with it later one.  

However, knowing how to test motherboard in case of a problem is not an easy thing.  Given that some people do not even know what motherboard slot has direct access to the north bridge perhaps highlights the challenge in this area.  

As such, it has become essential to try and look deeper into this issue.  Finding out about the problems that motherboards are faced with at some point is not an easy thing by any means.  This is why it has become more important to look deeper into this issue.  

How To Test Motherboard 

There are many ways that you can use to tell if a motherboard has failed.  For instance, you could have blue screens, sometimes your PC might even fail to detect USB drives.  These are just but some of the indicators that your motherboard has a problem.  

However, not knowing exactly what these problems are is a different thing altogether.  Given that there are many problems that apply to motherboards, it is not an easy thing to diagnose some of these problems.  Being this way, people have continued to suffer in their bid to try and establish exactly what some of these problems are.  

That said, the text below attempts to look into how to start motherboard diagnose problems that people are faced with.  If you have been struggling with this problem then the text below will assist you make a breakthrough in this quest.  

How To Test A Motherboard

The process of testing for a motherboard is not as easy as telling what motherboard slot has direct access to the north bridge.  This process is much more complicated than you even think just in case you think this is an easier process to carry out.  

For you to carry out this process completely and in the right way there are some tools that you need to be having.  If you do not have these tools then it might be harder for you to even carry out this process given that these tools are essential resources for this process.  

You will need a Phillips screwdriver 

You will need a multimeter to enable you check the voltages 

A working PSU 

A new cosmos battery necessary where it is required 

A CPU thermal paste 

Testing A Motherboard 

Before putting your new motherboard into the case, you need to taste the power of self-test.  The essence of this test is to help you find out if you have a working motherboard or not.  There are cases where you might have a motherboard that is not working which is why it is essential for you to run these tests where necessary.  

Step 1

Set the motherboard right on a flat and non-conductive surface, you could use a wooden table in this case.  

Step 2 

Once you have done this attach the CPU cooler and then connect it to the motherboard

Step 3 

Place at the very least one RAM module right into the slot which labeled {DIMM 1} 

Step 4 

Attach the GPU to the motherboard and then move ahead to connect that to the required power connector. 

Step 5

Once you have done that, attach the ATX 24 Pin connector right from the PSU right into the motherboard 

Step 6 

After that, connect the monitor right to the HDMI connection which is connected on the right side of the board for the onboard graphics right into the GPU if this is your primary display.  

Step 7 

After doing that, connect the PSU power cable to the surge protector 

Step 8 

For you to turn on the computer server make use of the power switch jumper to carry out this process.  If you do not have a power switch jumper you can use a screwdriver to carry out this process. Doing this will enable you to complete the power circuit.

Once you have carried out this test, move ahead and turn off the PC using a switch which is located right on the power supply. 

If after carrying out this process you realize that the computer boots to the BIOS then that is a good sign, you are good to go. Before even determining what motherboard slot has direct access to the north bridge this is one thing you need to find out.  If you are good to go from this side then that could mean that you are working with a good motherboard.  

However, you need to know that this test is only intended to help you determine if you are working with a good motherboard or not.   This therefore means that you cannot use this process to test whether your motherboard has a problem or not.  If you wish to diagnose whether your motherboard has some problems then there are some other processes that you can use to determine this.  

Conclusion 

Before you check what motherboard slot has direct access to the north bridge it is important for you to first of all test whether you have a sound motherboard.  The process above offers you directions that you can use to tell whether you have a functioning motherboard or not.  

Also Read:

Sofia Kelly is a passionate blogger. She loves to share her thoughts, ideas, and experiences with the world through blogging. Sofia Kelly is associated with The Daily Notes, Content Rally & Voice Of Action.

View All Post

Leave a Reply

Your email address will not be published. Required fields are marked *

YOU MAY ALSO LIKE

YOU MAY ALSO LIKE

YOU MAY ALSO LIKE